Boresnake – why US Armed Forces used them in Iraq

US armed forces in Iraq used the Boresnake to quickly clean combat weapons… they tossed their standard cleaning rods.

…you ask why?

Boresnake Features

  1. More surface area than 160 gun cleaning patches – cleans better and faster
  2. Embeded Bore Brushes – loosens fouling for easy removal
  3. Compact design – roll up and store in your pocket
  4. Reusable – wash and reuse many times
  5. Inexpensive – about $15 and will last many years

Boresnake Reviews

I have pretty much every caliber available in these Boresnakes, both rifle and handgun, and love them. They are great for a quick cleaning at the range, or any time you don’t want to spend too much time doing a full cleaning. You don’t even have to break down the weapon; just clear it and drag the snake through it a couple of times. Done.

These have got to be the easiest way to clean the inside of your rifle barrel. I remember I used to have to get a patch and a ramrod and the bristle thing and everything and it took me forever to clean it and I had to swap out parts and everything else. Now with this snake I feed it through it has bristles at the front and has oil infused tailing I run it through about 3 times and I can see it just the slight glisten of oil on the barrel that is exactly what I’m looking for and it saves so much time off cleaning your gun.

As someone who shoots frequently and with a variety of firearms, the Hoppe BoreSnake shotgun and rifle cleaners are an outstanding and easy-to-use solution to keeping gun bores clean and free of residue. I have three of them now, in various calibers, and wouldn’t be without them at my bench and in my range bag. I spray the looped end of the bore snake with cleaner spray (RemOil, CLP or similar), run the snake through my gunbarrel from the breach end a couple times, and it removes almost all residue deposits instantly. Easy and quick! It cuts down on the need to do more thorough cleanings, which can be time-consuming, by a bunch. I use them on my AR-15s, shotguns, rimfire rifles, and .30 cal rifles with excellent results. I definitely recommend the Hoppe BoreSnakes.

Click Here Now to buy the Boresnake at Amazon + Free shipping and a discounted price.

The Bore Snake eliminates these issues:

  1. Assembling a multi-piece gun cleaning rod
  2. Worn gun cleaning rod threads makes it wobble and potentially scratch your gun bore.
  3. Where to store a one piece 32″ gun cleaning rod
  4. How do you take a 32″ cleaning rod to the shooting range?
  5. Rod could bend when pushing it through a tight bore
  6. Accidentally step on a cleaning rod and it bends
  7. Cleaning rods may leave metal shavings in bore if it comes in contact with chamber or muzzle
  8. Cleaning rods could scratch bore if embedded with sand or other debris
  9. Jags and bore brushes have to be screwed in and changed.
  10. Screwing jags and bore brushes on a cleaning rod with gloves on
  11. Hunting for the appropriate size bore brush or jag among many
  12. Difficulty attaching cleaning patches on small jags

The Bore Snake is a long woven cotton rope with a weighted string attached to the front. The beginning of the bore snake has a large puffed ball of cotton where you can add gun cleaner, CLP or gun oil. Further down the snake are two embedded brass bore brushes followed by a length of wide woven cotton fabric that is squeezed in the bore tightly removing loosened carbon and copper fouling. The long woven snake provides a huge amount of contact area that scrubs, wipes and cleans the barrel bore. The Bore Snake is much more effective than a single or multiple patches. It has a much tighter fit than any patch with much more contact area.

shotgun bore snake

The Bore Snake is a perfect fit for field cleaning. The all-in-one gun cleaner rolls up and fits into any small bag or case. No parts to loose or misplace. There’s no screwing a brush or jag on nor replacing patches. Just add your favorite cleaner to the snake and pull it through the bore until it’s mirror clean. They are available in different sizes for shotguns, rifles and pistols. They roll up in a ball for easy storage. I keep mine in a zip lock bag.

So what do you do when a Bore Snake gets dirty?

Bore Snakes are machine washable. You can also hand wash them and reuse them over and over. They are pretty inexpensive so you can replace them when they get too dirty or worn out. The heavy duty woven snake is tough and will last through many washings.

Boresnake Usage Tips

Pulling the bore snake through the appropriate size gun barrel does take some effort. It is a very tight fit and really scrubs the bore. I wrap the weighted cord around my hand several times and then pull it through the bore slowly. You can also wrap the cord around a screwdriver handle or wooden dowel for more leverage. I use one Bore Snake for cleaning and another one for lubrication unless I’m using a gun CLP.

For shotgun cleaning they are indispensable. Shotgun bores are very easy to clean because there is no rifling nor copper fouling. I pull one through the barrel twice and it is mirror clean. It’s amazing how easy it is. Another benefit is you do not have to worry about damaging the bore or muzzle crown with a cleaning rod. I have also used a bore snake on an AR-15 rifle. It does work well and is much easier than a cleaning rod and bore brush. Just pull it through until the barrel is clean, usually about 5 or 6 times.

Save over 40% on a Shotgun BoreSnake at

Hoppe’s Bore Snake Viper

The Boresnake Viper is a newer bore snake with some enhanced features. The Viper Boresnake has 50% more bore brush to scrub and loosen ever more fouling. The original Bore Snake had a single bore brush embedded but the Viper has 2 brushes. Hoppe’s also added a nylon cone to the front of the Bore Snake to make it easier to start down a barrel bore. The cone is like a guide for the bore snake. It works great. The Viper Bore Snake also features a lubrication zone which is towards the end. You can apply gun cleaner to the front and then oil to the rear lubrication zone. This kills 2 birds with one stone. It cleans and then lubricates in one pass.

Hoppe’s Viper Bore Snake in cool packaging

Here’s the Viper Bore Snake with its tightly woven rope. It is pretty hard to pull a bore snake through a barrel. You will be surprised how tight a fit it is. It’s amazing how much it cleans in just one pass.

Here’s the Hoppe’s Viper Bore Snake rolled up for storage. You can stick it just about anywhere. Try that with a conventional gun cleaning rod.

Here are the 2 bore brushes embedded into the Viper Bore Snake rope. It provides twice the brushing power of the original Bore Snake. The Bore Snake rope has 160X as much contact area as any cleaning patch. It’s much more effective than 50 or 100 patches.

Bore Snake Gun Cleaning Kit

Here is the M-Pro 7 9 mm Bore Snake Cleaning Kit. It features a 9 mm Bore Snake, M-Pro 7 Gun Cleaner, M-Pro 7 LPX Gun OIl, utility brush and carry case.

This is the Hoppe’s Bore Snake Gun Cleaning Kit. This kit is more compact and features a Bore Snake, Hoppe’s No 9 Gun Bore Cleaner, Hoppe’s lubricating oil, Hoppes Weatherguard Cloths and a pulling tool. This gun cleaning kit comes in a very compact case and can be stored just about anywhere.

Hoppe’s Boresnake for Shotguns

I can’t tell you how easy shotgun cleaning is with a Boresnake. I used one on my Browning Citori and Maxus Field shotguns. Both were 12 gauge and used for hunting and trap shooting. I would typically shoot 200 rounds in an outing. I then went home and cleaned them with the Boresnake. I was finished in 15 minutes…both shotguns too!

Here’s the Boresnake in the handy snap close packaging. You can also store them in a ziplock bag. Nothing is more compact nor easier to use.

Boresnakes roll up in a nice ball so you can store them just about anywhere. I use the pull cord to tie the rope up.

The pull cord is super strong with a weighted copper tip. The weighted copper tip makes it easy to feed the pull cord down the barrel. You can use your hand to pull the boresnake through the barrel but I highly recommend you use some sort of “pull handle” like a dowel or screwdriver handle to wrap the pull cord around. It is quite difficult to pull a boresnake through a gun barrel. It’s a very tight fit.

Here’s a close up of the weighted copper tip. The weighted tip pulls the pull cord down the barrel if you tilt or stand the barrel upright.

This is the front of the Boresnake rope. It’s a big cotton ball where you apply gun cleaner or CLP. It’s very absorbent and will hold a lot of liquid. It’s purpose is to coat the inside of the bore similar to a cleaning patch but will hold 10x as much liquid. The front of the Boresnake rope is folded to form a cone shape which makes it start down the bore much easier.

This is the rope of the Boresnake. It’s cotton and finely woven into a super strong rope. The surface area is incredibly large like 160x that of a cleaning patch. It really scrubs and cleans the bore and is an extremely tight fit.

Further down the Boresnake rope is the bore brush section which contains 2 embedded bore brushes. These bore brushes are bronze phosphor and will loosen carbon, copper, plastic and lead fouling so it can be wiped away.

Here’s the rest of the Boresnake. The end is very wide and wipes the bore clean. I only used 3 passes on my shotguns and the bores were shiny clean. It is amazing.

This close up of the Boresnake end loop gives you an idea of the thickness and cross knitting of the Boresnake. The cross knitting or weave enables it to clean extremely well. When you pull a Boresnake through a bore, you’ll know why it cleans so well.

Hoppes Bore Snake Review

The Hoppes Bore Snake is the ultimate tool for cleaning firearm bores which includes handguns, rifles and shotguns. Using a Hoppes Bore Snake makes gun cleaning much more efficient which means you spend less time cleaning and more time shooting.

So what is a Hoppes Bore Snake?

A Bore Snake is an ingenious tool that looks much like a piece of rope made from a cotton weave. Its about 24 – 30 inches in length and has 1 or 2 bronze bore brushes embedded inside the woven rope. There is a thinner sting attached to the front which enables you to pull the Bore Snake through the gun barrel. Let’s see a photo.

Here’s one of my Hoppes Bore Snakes. This one is for my 12 gauge shotgun. It only takes me 12 minutes to clean my shotgun after shooting 100 shells. I spray CLP gun cleaner in the barrel and wait 10 minutes. I then spray a small amount of gun cleaner on the front of the Bore Snake and then pull it through the barrel 3 times. Done.

Here is a close up of the Hoppes Bore Snake embedded bronze bore brushes. When you pull the Bore Snake through the barrel, the bore brushes remove any metal or plastic fouling. The soft woven rope will wipe it clean afterwards. It’s a snap to clean gun barrels. I reuse the Bore Snake several times before replacing. You can actually wash them and reuse them over and over.

If you want to try one, here is a link….Hoppes Bore Snakes at

Tac44 Gun Cleaning Kit w/ Roll Pin Punches

The Tac44 2-in-1 Gun Cleaning kit with roll pin punches is an interesting combo. Punches always come in handy when cleaning guns, especially AR’s and AK’s.

If you want to grab one of these handy dandy tool/cleaning kits, here is a link….2-in-1 Gun Cleaning Kit/Roll Pin Punch Set at

  • 9 piece grip roll pin punch set helps to drive out or insert solid pins
  • 5 piece gun cleaning set includes 3 double-ended cleaning brushes and 2 double-ended picks to clean small parts and hard to reach areas
  • Zippered tool organizer pouch keeps everything neatly organized and easy to use!
  • 2 sets in 1: This is the only product on the market with both sets together!
  • Specially designed tool pouch, tools, picks and brushes. All have been tested in the field and chosen to be the Best on the market

Real Avid 1911 Bushing Smart Wrench

If you’ve ever owned a 1911 handgun then you will appreciate this tool….the Real Avid 1911 Bushing Smart Wrench.

Removing the barrel bushing on a 1911 style handgun can be a pain and dangerous too…watch out for the recoil spring when you remove the barrel bushing!!!

Here’s the OEM style 1911 barrel bushing wrench…


These work great but you have to be careful when turning the wrench and releasing the recoil spring and retainer. There’s a better tool though….


Introducing the Real Avid 1911 Bushing Smart Tool.


This tool is far easier on your hands.


Just turn and lift the 1911 up and out comes the recoil spring assembly without it ejecting across the room.


It’s easier to grip and turn than any other 1911 tool. If you have a 1911 then you might want to check this out….Real Avid 1911 Barrel Bushing Smart Tool at